VKM - All-Metal Viscosity Compensating Flowmeter and Switch
VKG - Viscosity Compensating Flowmeter & Switch
   VKM - All-Metal Viscosity Compensating Flowmeter and Switch
VKM - All-Metal Viscosity Compensating Flowmeter and Switch

Special Features:

  • ±5% Full Scale Accuracy
  • Viscosity-Compensated up to Δv=540 cSt
    (No Scale Recalibration Necessary)
  • Optional 4-20 MA output with digital scale
  • Direct Reading Scales for Oil
  • Installable in any Position
  • Vertical Connections for Easy Installation
  • Max. Pressure 3600/5000 PSI
  • All Media Contacted Parts available in Brass or Stainless Steel

Specifications:

  • Measuring Switching range: 0.03-0.12 to 2-20 GPM oil
  • Fitting: 1/4"-1" NPT
  • Material: brass, SS
  • Max. pressure: 3600 PSIG (brass)5000 PSIG (SS)
  • Max. temperature: 240°F
  • Accuracy: ± 5% FS
  • Options: reed contact, analog output
General Description

The VKM flowmeters and switches fill an important gap in the high viscosity media measurement regime. Using patented viscosity compensation system, these instruments are insensitive to viscosity and density changes during operation. This development in flow and measurement control technology has resulted in an extremely versatile instrument usable in almost all imaginable applications.

Specifications
Accuracy: ±5% full scale
Flow Media: e.g. mineral oil, water and other liquids
Mounting: universal, without recalibration
Measuring Principle: with float, spring-loaded
Max. Temperature: 240°F
Max. Pressure: 3600 PSIG for Brass units 5000 PSIG for SS units
Viscosity-compensated: up to Δv=540 cSt with same scale
Density-compensated: up to Δp=30 lb/ft3 with same scale
Housing: Nickel-plated Brass or SS 304
Fittings: Nickel-plated Brass or SS 304
Float: Brass or SS 304
Orifice: SS 301
Spring: SS 301
Seals: Buna-N for Brass units, Viton for SS units
Electr. Switch Housing: Plastic

Magnetically Operated Pointer Indicator: Nickelplated Brass, Polycarbonate
Mode of Electr. Protection: NEMA 4
Reed Contact:
N/O: AC: 1.5 A, 240 VAC,, 50 VA
DC: 1.0 A, 200 VDC, 50 W
SPDT: AC: 0.8 A, 240 VAC, 30 VA

Compact Electronic Option C34P
Power Requirement: 24VDC ±20%
Display: 3 digit LED
Output: 4-20mA, 3-wire RLoop<500 ohms
Switch: PNP, 300 mA Max.
Electrical Connection: Micro-DC plug, 4-Pin male
Electrical Protection: NEMA 4X/IP65

Ordering Information

VKM - All-Metal Viscosity Compensating Flowmeter and Switch

Dimensions
VKM - All-Metal Viscosity Compensating Flowmeter and Switch VKM - All-Metal Viscosity Compensating Flowmeter and Switch
VKM - All-Metal Viscosity Compensating Flowmeter and Switch VKM - All-Metal Viscosity Compensating Flowmeter and Switch
VKM - All-Metal Viscosity Compensating Flowmeter and Switch VKM - All-Metal Viscosity Compensating Flowmeter and Switch
Electrical Connection

Wiring of Reed Switch

VKM - All-Metal Viscosity Compensating Flowmeter and Switch

Electrical Data and Operational Limits

Maximum Voltage: 240 VAC
Maximum Current: N/O: 1.5 A
SPDT: 0.8 A
Maximum Power Dissipation: N/O: 50 VA
SPDT: 30 VA
Environmental Protection: IP 65 (IEC 259) (Equal to NEMA 4)

UL recognized, CSA approved


Copyright 2006 Flow Network 5065 Vail Drive Acworth, GA 30101 Phone (770) 917-0940 Fax (770) 917-8352
Email Sales@Flow-Network.com Website:
www.flow-network.com