|
 |
 |
VKG - Viscosity Compensating Flowmeter & Switch
 |
|
 |
|
| VKG - Viscosity Compensating Flowmeter & Switch |
 |
Special Features:
- ±5% Full Scale Accuracy
- For High and Low Viscosity
- Viscosity-Compensated up to 540 cSt
(No Scale Recalibration Necessary)
- Density-Compensated up to 30 lb/ft3
- Direct Reading Scales for Oil
- Installable in any Position
- Vertical Connections for Easy Installation
- Max. Pressure 175 PSI
- Brass or Stainless Steel Construction Available
Specifications:
- Measuring Switching range: 0.03-0.12 to 2-21 GPM oil
- Fitting: 1/4" NPT
- Material: brass, SS
- Max. pressure: 175 PSIG
- Max. temperature: 240 °F
- Accuracy: ± 5% FS
- Options: reed contact, pointer indicator
|
|
General Description
Flowmeter and switches type
VKG 6000, VKG 7000, and VKG 8000 fill
an important gap in the high viscosity
media measurement field. Using patented viscosity
compensation system, these instruments
are insensitive to viscosity and density
changes during operation. This
development in flow and measurement
control technology has resulted in an
extremely versatile instrument usable in
almost all possible applications.
Specifications
Accuracy: ±5% full scale
Repeatability: ±1% full scale
Flow Media: oil, water and other liquids
Mounting: universal, without recalibration
Measuring Principle: with float, springloaded
Mode of Operation: dependent on flow
not pressure
Max. Temperature: 240 °F
Max. Pressure: 175 PSI
Viscosity-Compensated: up to
Δv = 540 cSt with same scale
Density-Compensated: up to
Δp = 30lbs/ft3 with same scale
Housing: Aluminum-anodized
Glass: Borosilicate
Fittings: Nickel-plated Brass or SS 304 |
Float: Nickel-plated Brass or SS 304
Orifice: SS 301
Spring: SS 301
Seals: Buna-N for Brass units, Viton for SS
units
Electr. Switch Housing: Plastic
Mode of Electr. Protection: NEMA 4
Reed Contact:
N/O:
AC: 1.5 A, 240 VAC, 50 VA
DC: 1.0 A, 200 VAC, 50 W
SPDT:
AC: 0.8 A, 240 VAC, 30 VA |
Ordering Information
VKG flowmeters and switches with
pointer indicator
 |
VKG flowmeters and switches with
pointer indicator fill an important gap in the high
viscosity media measuring field. Using
patented viscosity compensation system, these
instruments are insensitive to viscosity and density
changes during operation. This development in
flow and measurement control technology has
resulted in an extremely versatile instrument,
usable in almost all possible applications. |
Specifications
Accuracy: ±5% full scale
Repeatability: ±1% full scale
Flow Media: oil, water and other liquids
Mounting: universal, without recalibration
Measuring Principle: with float, spring-loaded
Max. Temperature: 240°F
Max. Pressure: 175 PSI
Viscosity-compensated: up to Δv=540 cSt with same scale
Density-Compensated: up to Δp=30lbs/ft3 with same scale
Housing: Anodized Aluminum
Glass: Borosilicate
Fittings: Nickel-plated Brass or SS 304 |
Float: Nickel-plated Brass or SS 304
Orifice: SS 301
Seals: Buna-N for Brass units, Viton for SS units
Electr. Switch Housing: Plastic
Nickel-plated Brass, Polycarbonate
Mode of Electr. Protection: NEMA 4
Reed Contact:
N/O:
AC: 1.5 A, 240 VAC, 50 VA
DC: 1.0 A, 200 VDC, 50 W
SPDT:
AC: 0.8 A, 240 VAC, 30 VA |
Ordering Information
|
|
